Why ONE-TOUCH Holders Need Occasional Care
ONE-TOUCH magnetic holders are designed as the final destination for your collectible cards, photos, and mini items. Their ultra-clear materials and UV-blocking additives keep your items visible and protected, but dust, fingerprints, and minor smudges can dull the display over time. Regular light cleaning preserves the clarity and keeps your collection looking its best.
Cleaning Your ONE-TOUCH Holder in Three Steps
The supplied information confirms that ONE-TOUCH holders use non-PVC materials with UV-blocking additives. No specific cleaning instructions are included in the catalog, so the following general advice applies to all rigid plastic display cases.
- Remove the collectible from the holder: Open the magnetic closure and slide the hinge to separate the two pieces. Take out the card, photo, or collectible and set it aside on a clean, dry surface. This prevents any moisture or cleaning residue from contacting your item.
- Wipe the interior and exterior surfaces: Use a soft, lint-free microfiber cloth slightly dampened with water or a mild plastic-safe cleaner. Gently wipe both pieces of the holder, focusing on areas with visible smudges or dust. Avoid paper towels or abrasive cloths that could scratch the ultra-clear material.
- Dry completely before reassembly: Allow both halves to air-dry fully, or use a dry section of the microfiber cloth to remove any moisture. Once dry, reinsert your collectible, close the slide-in hinge, and secure the magnetic closure.
What to Avoid When Cleaning
Do not use ammonia-based glass cleaners, alcohol, or harsh solvents. These can damage the non-PVC material or cloud the ultra-clear finish. Stick to water or a cleaner specifically labeled safe for acrylic or polycarbonate plastics. Also avoid submerging the holder in water – a damp cloth is sufficient.
Storing Your ONE-TOUCH Holders Between Displays
When not in use, store holders in a cool, dry place away from direct sunlight. The UV-blocking additives protect your collectible while inside the holder, but prolonged exposure to strong light when empty may affect the plastic over time. Stacking multiple holders is fine, but place a soft cloth between them to prevent scratches. The sawtooth hangers on some models (like the 4-Card Black Border ONE-TOUCH) allow vertical or horizontal wall display, which can also be used for storage if the area is dust-free.
What the Catalog Confirms About Your ONE-TOUCH Holder
- 130PT 4-Card Black Border UV ONE-TOUCH® Magnetic Holder: The 4-Card Black Border ONE-TOUCH Magnetic Holder is made with non-PVC ultra-clear materials with UV-blocking additives and diamond corners. The non-PVC and UV-blocking construction means you should avoid chemical cleaners that could react with the plastic. Gentle cleaning preserves the UV protection and clarity.
130PT 4-Card Black Border UV ONE-TOUCH® Magnetic Holder - 8" x 10" Black Border UV ONE-TOUCH® Magnetic Holder: The 8" x 10" Black Border ONE-TOUCH Magnetic Holder uses UV-blocking additives and non-PVC materials for acid-free protection. Larger holders have more surface area to keep clean. The same gentle cleaning method applies, and the dual magnetic closure means you can open and close without tools for easy maintenance.
8" x 10" Black Border UV ONE-TOUCH® Magnetic Holder - ONE-TOUCH® S Magnetic Holder (5ct): The ONE-TOUCH® S Magnetic Holder (5ct) is made with acid-free, non-PVC materials with UV-blocking additives. Even the compact mini holder benefits from the same care routine. The small size makes it easy to wipe clean, but the material is identical to larger holders.
When to Replace a ONE-TOUCH Holder
ONE-TOUCH holders are built to last, but visible scratches, cracks, or a weakened magnetic closure are signs it's time for a replacement. The supplied information does not include a lifespan estimate, so inspect your holders periodically. If the ultra-clear material becomes cloudy or the slide-in hinge no longer fits snugly, a new holder ensures your collectible stays secure and well presented.
